Fainting goats
have a condition known as myotonia congenita that causes their muscles to contract in times of high stress. It can cause them to stiffen or fall over. Despite this condition, fainting goats do not require unusual shelters and make great pets.
Instructions
Planning for the Shelter
1. Consider the climate to determine what type of shelter to build. It's most important that fainting goats are protected from wind and rain.
2. Decide how big you need to build the shelter, depending on the number of goats you currently have. Also, keep the climate in mind. Decide if a smaller space will keep them warmer in winter, or if they need more space to stay cool in summer.
3. Find a location for the shelter. A three-sided shed works well for mild climates. However, a four-sided shelter with a small door might be ideal. The goats can roam in and out, but it will provide them with more warmth and protection from predators.
4. Consider how many fainting goats you plan to have in the future. If you are you looking to expand your herd, keep this in mind when you build a shelter. You can easily add sections or stalls if necessary.
5. Decide on your budget. If you are serious about breeding/selling goats, then you may spend more on a shelter than a hobbyist. Natural shade and wind breaks are adequate shelter in most climates, but a simple, draft-free, three-sided shed is relatively cheap and provides good protection.
Building the Shelter
6. Find a suitable location: high, flat ground that won't flood. The back of the shelter should face the wind, so your goats have protection from drafts.
7. Measure how big you want the shelter to be. Consider at least 10-by-10 feet for up to three goats, and larger if you will breed them or plan on keeping more goats.
8. Dig four holes for the corner posts. The holes should be at least 3 feet deep. Reinforce the posts with concrete. Let the concrete dry around the posts before adding dirt, and pack the dirt tightly.
9. Build the three sides with sturdy 2-x-4 inch wooden boards. Use at least three boards for each side, spacing them evenly. Use at least four nails for each end of the boards: two on one side, two on the other. Nail boards in place for the roof.
10. Build the roof from thick plywood and shingles or tin. Tin will be quicker and cheaper, but may not be as aesthetically pleasing.
11. Nail thick plywood boards to the inside of the shelter. It will prevent the goats from climbing and will provide extra protection from the elements. Nail plywood and/or tin to the outside.
12. Add bedding to the floor of the shelter. Straw and/or pine shavings work very well.
Related posts
Versatile and hardy animals, goats require little in terms of housing. A three-sided goat shed provides protection from drafts and rain, the two major causes of serious goat illnesses such as pneu...
Dog in its houseYou generally need a doghouse if you have a dog you want to leave outside in the backyard a lot. For one thing, a doghouse will protect your dog from the hot sun. You don't need to...
Although you might keep your dog indoors at night and at least part of the day, there are times when your dog will want to sleep outside. As long as you have a very secure backyard fence, letting...
The roof of a doghouse protects not only your dog, but also the doghouse. Following are a few guidelines for building a simple slanted roof - a shed roof - that lifts off for cleaning.Instructions...
You should always have shelter for your dog, even he is only outside for an hour at a time. If your dog spends most of his time outside, this is the perfect solution. A wooden dog house, like anyt...
